0161 798 5872
0161 798 5872
Location: ManchesterProperty Type: 8 Storey BuildingInstalled: Hydrovar XÂ This 8-storey building in Trafford Park recently ran out of water to the top two floors due to ever decreasing mains pressure. This caused large scale operational issues on site and as such they...
Location: GlasgowProperty Type: HotelInstalled: Hydrovar XÂ We recently completed this smart Xylem Hydrovar X GHV Booster Set installation at a large Hotel in Central Glasgow. The existing pumps were over 30-years old and obsolete. Site were running them until failure...
We carried out this installation for Hydraclean as emergency works following the complete failure of the existing Cold Water Booster Unit at this site in Stevenage. Fortunately, Hydraclean were able to attend the same day as the failure and install a temporary bypass...
We have been continuing our progress through a group of schools in Knowsley supplying and installing 2no. H-Line Units for their LTHW and CHW systems. These Energy Centres are really quite tight on space and as per previous installs we are having to install 2no. units...
Recently, whilst working up in Aviemore, we were asked to look at another problematic booster set they had on site. We had been nursing the set along for some time and eventually it had 1no. failed pump, failed pump vessel and some control issues in the sense the main...
We recently picked up the service contract for this building in Liverpool and on the first service found both 300 litre expansion vessels U/S on the primary heating system. We placed a temporary charge in the vessels and quoted for replacement vessels or a replacement...
A nice little twin-pump booster installation completed at a site in Weston-super-mare last week. The existing set was the obsolete Lowara TKS range and had more than served its purpose. The existing set failed causing a water outage. Fortunately, we were only just...
We recently swapped out these 200 litre and 500 litre Zilmet Expansion Vessels at a hotel in Prestwick. The existing vessels had failed on a recent service visit, unfortunately this fell after the site had missed a couple of service visits due to Covid and budget...
We recently picked up the service of this building and found an ageing and heavily dilapidated set down to a single pump. The pressure vessel had failed as well as a multitude of control issues. We supplied and installed the new Xylem Hydrovar X booster set through...
We were recently contacted by a new customer who found us via our website. They had a booster unit in a shed feeding 6no. high end apartments in Central London which was dilapidated and down to 1-pump which they were looking to replace. We successfully won the work...
The H-Line is growing in stature in the UK and this project increased our application range for the product. Typically, we have installed the H-Line alongside MDPE Expansion Tanks. However, in this instance, this is up to an 18 Megawatt system at full capacity with...
We recently installed this Grundfos PHT Pressurisation Unit and Global Water Solutions Expansion Vessel at a site in South Wales. The existing Pressurisation Unit was analogue controls with failed switches and down to 1-pump. Our engineers modified the pipework and...
It has been some time since we installed a Lowara Presfix Beta Pressurisation Unit; so when our lads installed one recently we thought it would make a nice post! The existing analogue filler had U/S switches and PRV, the vessel diaphragm had failed and given age and...
Shortly before Christmas we were called to a large indoor arena in the Northwest to look at poor water pressure in their offices. We found the existing setup was a large storage tank in the roof providing atmospheric supply to the floors below. Whilst a common setup,...
Below is a satisfying job to finally see come to fruition. We have been quoting the below set as urgently requiring replacement for almost 10-years! We first picked up the maintenance of this booster set at a holiday park in Suffolk in 2014, at which point we found a...
Booster sets are often viable for repair rather than replacement. Whilst this option is often offered it is not always taken. Recently, we completed this smart repair to a 3-pump fixed speed booster set at a site in Preston. The existing set had a failed controller...
Further building on our partnership with Equans, we have now completed the second installation at one of their schools in the North West. Similar to an installation completed at another high school recently this school had 1no. Pressurisation Unit feeding both the...
We recently installed this 3-pump Stuart Turner Aquaboost booster set in a prominent office building in Central Manchester. The existing unit had served it’s time and had failed drives and was down to 1no. pump. We provided the customer with a repair or replace option...
This Mikrofill Maxi and GWS Challenger vessel installation was carried out at a North West University as part of planned upgrade works on site. The existing analogue grundfos unit had come to end of life and was due for replacement. Mikrofill and GWS are the ideal...
PressBoost recently completed this Booster Set install working for PumpSolutions at a site in Leeds. Â The Grundfos Hydro Multi E set is a fantastic, energy efficient modern equivalent for the existing fixed speed set which was long obsolete and due for replacement as...
PressBoost were recently contacted by this site in Warrington to pressurise their heating system which was previously F&E. We selected the HL Hydronics H-Line for this application which is one of the ideal install locations for this dynamic spill & fill unit....
We recently installed this new H-Line Pressurisation Unit at a University in South Wales. The existing unit was not a design we like, both pumps were U/S, NRVs failed and the spill type expansion vessel diaphragm had failed. Given the issues with the unit, this was...
We recently completed this emergency booster set replacement at a site in Central Liverpool. The existing unit had failed completely and caused a water outage in the building. We had been quoting the unit for replacement for some time as 1-pump is already failed, the...
We recently installed this Lowara SMB30 set at a site in Manchester. The existing set had obsolete controls and was intermittently faulting causing water outages. Due to age and condition of that unit we decided replacement set was the best course of action. The SMB...
PressBoost recently completed this twin-pump booster set installation very close to home! This was installed to a domestic property around the corner from our base in Prestwich Manchester. We recently carried out the first service visit to this ageing booster set...
We recently attended a South Wales University to install a new Pressure Unit and Expansion Vessel on a chilled water system where the existing equipment had completely failed.The new Lowara Presfix Beta Pressurisation system and Global Water Solutions Expansion Vessel...
This University has been working with us for some time to manage its assets and strategically remove expansion vessels where possible when planned upgrade works are required. At this building, they had an old analogue Pressurisation Unit come up for replacement under...
We were recently asked to quote for the installation of 2no. Vacuum Degassers at a site in Leeds. We were successful in winning the job and attended site to install the 2no. O2-X Vacuum Degassers and Magnetite filters to the LTHW and CHW systems on site. Our engineers...
Looking to remove costly Expansion Vessels from your site? The H-Line is a fantastic, dynamic solution to Pressurisation that removes traditional expansion vessels from your system. This case study is a fantastic example as the existing installation was a standard...
We recently completed the installation of this @StuartTurner Cold Water Booster Unit at a Tower Block in Manchester. The existing unit was obsolete, down to 2-pumps, accumulator vessel U/S and had controls issues. Working with the site contractor we were asked to...