0161 798 5872
0161 798 5872
This twin-pump Hydrovar X installation was carried out as emergency works at a hotel in Wigan in late 2025. The existing set initially suffered complete failure before water was restored temporarily and we were asked to quote a full replacement by a new customer. Time...
A recent project at a school in the Greater Manchester area involved the replacement of a failing three-pump fixed-speed booster set. With the existing unit close to complete failure, the site required a rapid turnaround to restore consistent water supply. Our team...
We were asked by a South Wales local authority to replace an obsolete booster set which had been bypassed for some time with a modern equivelant booster set. The difficulties:Space! This plantroom was very tight, as a result we either needed a bespoke booster set or a...
We recently completed this installation at a multi purpose building in Manchester City Centre. The existing fixed speed set was ageing and had more than stood the test of time. However, now both pumps had completely failed and the building had no water. We managed to...
We recently installed this twin pump set at St Helens Hospital. We have just started working with Vinci for Liam Campbell and Vercity for this new site - our thanks to all for the support to help get this job completed on time and to plan. The existing set was...
PressBoost recently completed a successful booster set replacement at a large court building in the North West. The original system, which featured outdated fixed-speed pumps and a failed pressure vessel, had been operating inefficiently for some time. By the time of...
After ongoing reliability issues caused by a failed pump, drive, and problematic panel, this Bradford client needed a dependable solution. PressBoost Engineers Carl Rogerson and Kieran Buckley-Shields installed a new two-pump variable speed booster set featuring the...
An existing Boosted Water Unit at a Folkestone hotel was found to have two failed inverters and a faulty pump. We replaced the system with a bespoke Stuart Turner three-pump variable speed unit, complete with high-performance Lowara pumps. Installation carried out by...
We were recently asked to provide a quotation for a replacement booster set at this apartment block in Liverpool following a series of water outages they had experienced, leaving the building teetering on one remaining pump. We quoted for multiple options with the...
In February 2025 we completed the replacement of a 4-pump fixed speed booster set at BWFC, to convert them to variable speed and provide huge energy savings for the stadium long term. The existing Holden and Brooke set was long obsolete and is original to the build of...
We recently attended this shopping centre in Sheffield where the existing Grundfos home Booster Set had failed.PressBoost Senior Engineer Andrew Shelley replaced the unit with an equivalent unit from Lowara, the Resvari Plus 250 3-4.5 Cat 5 Booster Set.A tidy,...
This college in the North West was new site for us, and we had to replace two old fixed speed units. One of the units had a failed pump and non-return valves causing the remaining working pump to run constantly even when no demand was present. PressBoost engineers Ben...
This leisure centre in Liverpool had a Booster Unit with an obsolete panel and pumps. A panel fault was causing the pumps to constantly run which was heavily cavitating them.We replaced the existing unit with a new variable speed Xylem SMB Booster Unit, which will...
The old fixed speed booster set was down to one pump that was noisy.This was replaced by a Xylem SMB variable-speed Booster Set set which will provide significant energy savings, being more efficient and a much lower kw motor rating. We also replaced the tanks with 2...
We recently attended a site in Salford where the existing 3-pump booster set was being maintained by another company and had failed completely. Time was of the essence as this meant the building was temporarily fed by another booster set. Fortunately, we were asked to...
Here we have a nice 3-pump Xylem Hydrovar X CWB Set installation in Gloucester.Whilst carrying out a PPM visit at this large site in May we found No.1 pump off and U/S, No.3 pump extremely noisy and not delivering, with only No.2 pump fully operational. This coupled...
Location: NottinghamProperty Type: HotelInstalled: Xylem SMBDuring an emergency callout to this hotel in Nottingham, we found a 3-pump horizontal booster set in a basement plant room with no sumps in the room. Unfortunately this spelt the end for the existing unit and...
Location: BuryProperty Type: Apartment BlockInstalled: Hydrovar X We completed these 2no. XylemUK GHV Hydrovar X installations to an apartment block in Bury late last year. We completed the installation of the 3-pump set first and site were impressed with the...
Location: ManchesterProperty Type: 8 Storey BuildingInstalled: Hydrovar X This 8-storey building in Trafford Park recently ran out of water to the top two floors due to ever decreasing mains pressure. This caused large scale operational issues on site and as such they...
Location: GlasgowProperty Type: HotelInstalled: Hydrovar X We recently completed this smart Xylem Hydrovar X GHV Booster Set installation at a large Hotel in Central Glasgow. The existing pumps were over 30-years old and obsolete. Site were running them until failure...
We recently installed this Xylem GUV30/33SV set at a premium hotel in Central Manchester. The existing set was obsolete and down to a single pump, constantly running to maintain water to the hotel. This was a big job for us, both the existing set and the new set had...
A nice little twin-pump booster installation completed at a site in Weston-super-mare last week. The existing set was the obsolete Lowara TKS range and had more than served its purpose. The existing set failed causing a water outage. Fortunately, we were only just...
We recently picked up the service of this building and found an ageing and heavily dilapidated set down to a single pump. The pressure vessel had failed as well as a multitude of control issues. We supplied and installed the new Xylem Hydrovar X booster set through...
We were recently contacted by a new customer who found us via our website. They had a booster unit in a shed feeding 6no. high end apartments in Central London which was dilapidated and down to 1-pump which they were looking to replace. We successfully won the work...
It has been some time since we installed a Lowara Presfix Beta Pressurisation Unit; so when our lads installed one recently we thought it would make a nice post! The existing analogue filler had U/S switches and PRV, the vessel diaphragm had failed and given age and...
Below is a satisfying job to finally see come to fruition. We have been quoting the below set as urgently requiring replacement for almost 10-years! We first picked up the maintenance of this booster set at a holiday park in Suffolk in 2014, at which point we found a...
We recently installed this 3-pump Xylem SMB Booster set to replace a very old and failed fixed speed booster set at a hotel in The Midlands. The existing set was oversized, fixed speed and down to 1-pump. Whilst it had stood the test of time, site were in desperate...
We recently completed this emergency booster set replacement at a site in Central Liverpool. The existing unit had failed completely and caused a water outage in the building. We had been quoting the unit for replacement for some time as 1-pump is already failed, the...
We recently installed this Lowara SMB30 set at a site in Manchester. The existing set had obsolete controls and was intermittently faulting causing water outages. Due to age and condition of that unit we decided replacement set was the best course of action. The SMB...
We recently installed this Lowara Presfix Beta and Zilmet 100 litre expansion vessel at a site in Oldham. The existing unit was heavily dilapidated and corroded due to exposure to the elements with an inappropriate housing over it (the pictures speak for themselves!)....