SPEAK TO US TODAY

0161 798 5872

SPEAK TO US TODAY

0161 798 5872

York Research Facility

We recently completed one of PressBoost’s largest ever projects at a research facility in York. We were called in by the client to supply and install some specified @Reflex equipment in one of their Energy Centres.

The existing units date back to 1994! However, they had been causing site problems for a number of years and was consuming a lot of their resource trying to nurse it through. Site decided as the units approached 30-years old, it was time for an upgrade!

PressBoost attended site and supplied and install the new Reflexomat RS 400/2 units along with 2no. 1500 litre vessels. The units are installed in a Master/Slave setup. We have also installed a new control panel, new CAT5 cold water booster set and tank and system isolation valves to provide a full system overhaul for site.

This was a logistically difficult job and an enormous system with 12 Megawatt of heat input. It was critical to site that down time was kept to a minimum, therefore, we installed a temporary pressurisation unit to maintain heat to site for the duration of the works. All completed in 5-days, a fantastic looking job which we are immensely proud of.

This is a new site to us, and we have now been instructed to complete an identical job in another energy centre on site!

Get in touch with all your Pressurisation needs today.

Project Before

Project After