H-Line Spill & Fill Replacement – The Midlands

The existing problems on site: We were recently called out to an ageing Pressmain GV100 Spill & Fill pressurisation unit as the unit would not stop running and the tank was leaking. We have had contact with this pressurisation unit for the last 2 years following several years of neglect. The set itself has provided […]

PressBoost 1st H-Line Installation

Pressurisation Unit Install – Sunderland As you may have seen from our recent posts, PressBoost have recently linked up with Bio-Nordic and HL Hydronics in Sweden, to bring the H-Line Pressurisation Unit to the UK. We recently installed the first of these units at a hotel in Sunderland. This site is a new site for […]

The HL Hydronics H-Line Pressurisation Unit

The Partnership: We were recently contacted by HL Hydronics as they wished to introduce the H-Line Pressurisation Units and Polyethylene Tanks that they manufacture to the UK. After reviewing some technical literature, we were impressed and needed to know more. Based in Töcksfors, Sweden, HL Hydronics have been manufacturing Pressurisation Units and distributing them across Scandinavia […]

Spill & Fill to Sealed System Conversion

Dilapidated Spill & Fill Setup This Spill & Fill unit had served the test of time as it was c.20 years old. It had only suffered failure due to age and obsolescence. This led to the pump vessel failing, which had a knock on effect and caused both pumps to fail. The tank was heavily […]

3 x Pressurisation Unit Installations

The background: These jobs were carried out at 3 different hotels in Bournemouth. All 3 units were u/s and in need of replacement. As a result, PressBoost installed all 3 units in a 2 day trip, thus, by combining the 3 jobs into such a small time frame we managed to save on labour and travelling expenses […]

Foot Load Sensor Pressurisation Unit Replacement

The Install: PressBoost carried out this pressurisation unit replacement at a site in Salford. The existing foot load sensor pressurisation unit had numerous single points of failure and site had been inundated with problems with the equipment. Additionally, multiple parts were obsolete, as a result, the most cost effective and reliable solution was to replace the unit. […]

Pressurisation Unit and Pressure vessels replacement

This site in Liverpool had multiple problems with their heating system that were causing reliability issues. The control board on the existing LTHW pressure unit was faulty and obsolete while one of the pumps was U/S. Furthermore, both of the 500 litre vessels were U/S. PressBoost replaced both 500 Litre vessels and replaced the pressure unit with a […]